Home › Tire Maintenance
Tire Maintenance
Tire maintenance made simple
Tires wear, lose pressure and age whether or not anyone is watching. Maintenance is the routine that keeps them road-ready: correct pressure, adequate tread, timely rotation, and an eye on damage and age. This hub gathers the checks and intervals that matter, and explains what each one protects against.
Start here
The single most useful habit is checking tire pressure when the tires are cold, at least monthly and before long trips, then topping up to the figure on the driver\’s door placard. Soon after, learn to read tread depth, because worn tread lengthens stopping distances, especially in rain. Rotate your tires on the interval in your owner\’s manual to even out wear, and have balance and alignment checked if you notice vibration or uneven wear. Inspect sidewalls for cuts and bulges, and be aware of tire age, since rubber degrades over time even with little tread wear. Replace tires that are worn, damaged or past their safe service life.
Featured guide
Our maintenance guide covers the full routine. The focused guides below explain pressure and tread checks in detail.
The routine checks and intervals that keep tires safe.
Reading the placard and using a gauge accurately.
Measuring wear and knowing when it is too late.
Keeping pressure topped up away from a service station.
Explore by task
Pick the maintenance job you are about to do and get the detail that applies.
Why temperature changes pressure and when to measure.
What depth and wear patterns tell you.
Evening out wear and smoothing vibration.
Why old rubber can be unsafe even when it looks fine.
What changes with heat, cold and long trips.
A simple learning pathway
Maintenance is a loop: notice, check, then act before small issues grow.
Step 1
Identify what changed
Pressure warnings, vibration or visible wear each point to a different check.
Step 2
Choose the right check
Use a gauge, a tread tool or a visual inspection as needed.
Step 3
Compare what to do
Decide between topping up, rotating, or booking a professional inspection.
Useful tool
The converter switches between PSI, bar and kPa so you can match any gauge to your placard. It converts units only and does not state the correct pressure for your vehicle.
All Tire Maintenance articles
Tire maintenance guides and answers, added as they are published.
Tire Maintenance articles are on the way.
We are preparing clear, safety-first guides for this topic. In the meantime, explore the guides linked above or check back soon.
Safety and editorial note
Always follow your vehicle and tire manufacturer’s figures for pressure, rotation and replacement. This is general guidance and does not replace the owner’s manual or a qualified inspection.
Read our editorial policy and safety review policy.